Intellinet 561242 network switch Unmanaged Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) 1U Black

Intellinet 561242. Switch type: Unmanaged. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 24, Installed SFP modules quantity: 2. Full duplex. MAC address table: 8192 entries, Switching capacity: 52 Gbit/s. Networking standards: IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x. Power over Ethernet (PoE). Rack mounting, Form factor: 1U
Manufacturer: Intellinet
SKU: 5143396
Manufacturer part number: 561242
GTIN: 0766623561242
High-Power Unmanaged PoE Switch with LCD Status Display_x000D_ _x000D_ The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports (561242) passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 24 Gigabit Ethernet ports, this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1,000 Mbps._x000D_ _x000D_ _x000D_ _x000D_ Power over Ethernet 802.3at_x000D_ _x000D_ This high-powered switch supports the IEEE 802.3at protocol and can inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimising the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short-circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter._x000D_ _x000D_ _x000D_ _x000D_ Innovative LCD Status Display_x000D_ _x000D_ The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports is equipped with an LCD status screen on the front that provides real-time power information. This includes how much power each connected PoE device consumes, the combined used-power total of all connected devices and the total power available. Additionally, the LCD screen informs users of potential warnings for overload, high temperature, short-circuit protection and others. Thanks to this feature, you are always informed about the status of your PoE switch with a glance at the screen._x000D_ _x000D_ _x000D_ _x000D_ Eliminate Bottlenecks with 26 Gigabit Ports._x000D_ _x000D_ Equipped with 24 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, this switch offers plenty of performance for your computers, servers and other networking devices. In addition, two small, form-factor pluggable GBIC module slots (SFP) provide fibre connectivity for greater distances. These are not shared combo-ports but true Gigabit ports,pushing the total available bandwidth up to 52 Gbps. _x000D_ _x000D_ * Total PoE budget for this switch is 370

 

  • Provides power and data connection for up to 24 PoE network devices
  • Saves time and money by delivering data and power via existing network cables
  • 10/100/1000 auto-sensing ports automatically detect optimal network speeds
  • LCD display for easy access to real-time PoE status monitoring
  • IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports
  • Power output up to 30 watts per port*
  • PoE power budget of 370 watts
  • Two small form-factor pluggable GBIC module slots (SFP)
  • Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points, VoIP phones, IP cameras)
  • Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
  • Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification
  • Green Ethernet power-saving technology deactivates unused ports and adjusts power levels based on the cable length
  • All RJ45 ports with Auto-MDIX (auto uplink) support
  • Store and forward switching architecture
  • IEEE 802.3x flow control for full duplex
  • Supports up to 8192 MAC address entries
High-Power Unmanaged PoE Switch with LCD Status Display_x000D_ _x000D_ The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports (561242) passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 24 Gigabit Ethernet ports, this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1,000 Mbps._x000D_ _x000D_ _x000D_ _x000D_ Power over Ethernet 802.3at_x000D_ _x000D_ This high-powered switch supports the IEEE 802.3at protocol and can inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimising the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short-circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter._x000D_ _x000D_ _x000D_ _x000D_ Innovative LCD Status Display_x000D_ _x000D_ The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports is equipped with an LCD status screen on the front that provides real-time power information. This includes how much power each connected PoE device consumes, the combined used-power total of all connected devices and the total power available. Additionally, the LCD screen informs users of potential warnings for overload, high temperature, short-circuit protection and others. Thanks to this feature, you are always informed about the status of your PoE switch with a glance at the screen._x000D_ _x000D_ _x000D_ _x000D_ Eliminate Bottlenecks with 26 Gigabit Ports._x000D_ _x000D_ Equipped with 24 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, this switch offers plenty of performance for your computers, servers and other networking devices. In addition, two small, form-factor pluggable GBIC module slots (SFP) provide fibre connectivity for greater distances. These are not shared combo-ports but true Gigabit ports,pushing the total available bandwidth up to 52 Gbps. _x000D_ _x000D_ * Total PoE budget for this switch is 370

 

  • Provides power and data connection for up to 24 PoE network devices
  • Saves time and money by delivering data and power via existing network cables
  • 10/100/1000 auto-sensing ports automatically detect optimal network speeds
  • LCD display for easy access to real-time PoE status monitoring
  • IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports
  • Power output up to 30 watts per port*
  • PoE power budget of 370 watts
  • Two small form-factor pluggable GBIC module slots (SFP)
  • Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points, VoIP phones, IP cameras)
  • Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
  • Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification
  • Green Ethernet power-saving technology deactivates unused ports and adjusts power levels based on the cable length
  • All RJ45 ports with Auto-MDIX (auto uplink) support
  • Store and forward switching architecture
  • IEEE 802.3x flow control for full duplex
  • Supports up to 8192 MAC address entries
Products specifications
Attribute nameAttribute value
Depth8.04"
Width17.4"
Height1.73"
Weight8.82 lbs
Housing MaterialMetal
Switch TypeUnmanaged
Installed SFP modules quantity2
Switching capacity52 Gbit/s
Rack mount kitY
Power over Ethernet (PoE) power per port30 W
Technical details
Product colorBlack
Flow control supportY
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity24
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Power over Ethernet plus (PoE+) ports quantity24
Design
CertificationFCC Class A, CE, RoHS
Form factor1U
Operational conditions
Operating temperature (T-T)0 - 45 °C
Storage temperature (T-T)-10 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Power
AC input frequency50 - 60 Hz
AC input voltage100 - 240 V
Power protection featuresOver voltage, Overload, Short circuit
Total Power over Ethernet (PoE) budget370 W
Power consumption (max)420 W
Features
Mean time between failures (MTBF)144000 h
Full duplexY
Number of fans2 fan(s)
LED indicatorsActivity, Link, PoE, Power, Speed
Noise level21.3 dB
Other features
Rack mountingY
MAC address table8192 entries
Packaging content
ManualY
Cables includedAC
Performance
Networking standardsIEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x
Auto MDI/MDI-XY
Network
Cable types supportedCat5,Cat5e
Copper ethernet cabling technology10BASE-T,100BASE-TX,1000BASE-T
Packet forwarding rate (10 Mbps)14880 pps
Packet forwarding rate (100 Mbps)148800 pps
Packet forwarding rate (1 Gbps)1488000 pps
Auto-sensingY
Data transmission
Packet buffer memory0.512 MB
Store-and-forwardY
Power over Ethernet (PoE)
Power over Ethernet (PoE)Y
Product tags
  • (56200)