Houston, TX Office Equipment - Apollo Office Systems

Cisco Catalyst SUP720-3BXL, Refurbished Managed L2/L3 1U Metallic

Cisco Catalyst SUP720-3BXL, Refurbished. Switch type: Managed, Switch layer: L2/L3. Basic switching RJ-45 Ethernet ports quantity: 2. Full duplex. Switching capacity: 40 Gbit/s. Rack mounting, Form factor: 1U
Manufacturer: Cisco
SKU: 10480522
Manufacturer part number: WS-SUP720-3BXL-RF
The Cisco® Catalyst® 6500 Series/Cisco 7600 Series Supervisor Engine 720-3BXL (Sup 720-3BXL) is the third-generation supervisor engine for the Cisco Catalyst 6500 Series Switch and Cisco 7600 Series Router. It addresses the growing data-plane requirements of service provider and enterprise customers by delivering scalable, enhanced services such as hardware-accelerated IPv4, IPv6, and Multiprotocol Label Switching (MPLS). The Cisco Sup 720-3BXL integrates a high-capacity crossbar switching fabric that can deliver up to 40-Gbps capacity per slot for a total system capacity of 720 Gbps. The Cisco Sup 720-3BXL integrates a high-performance 720-Gbps switch fabric with a new routing and forwarding engine into a single module. The integrated switch fabric provides up to 40-Gbps full-duplex capacity per slot, allowing it to support third-generation high-performance, high-density Gigabit Ethernet and 10-Gigabit Ethernet interfaces as well as all existing LAN, WAN, and services modules, including the widely deployed FlexWAN and optical services modules to address a broad range of WAN edge aggregation deployments from DS-0 through OC-48/STM-16. The Cisco Sup 720-3BXL builds on the proven Cisco Express Forwarding architecture by supporting centralized forwarding (Cisco Express Forwarding) and distributed forwarding (distributed Cisco Express Forwarding) to provide a highly scalable and cost-effective platform. The Cisco Sup 720-3BXL delivers a modular, resilient, scalable, and secure Layer 2 or Layer 3 solution by: - Enabling advanced IP services such as MPLS, IPv6, and quality of service (QoS). - Supporting high-performance, third-generation Ethernet interfaces. - Delivering predictable and scalable system performance up to a sustained 400 Mpps using distributed forwarding cards (DFCs). - Scaling hardware-capable Forwarding Information Base (FIB) table entries to 1 million routes. - Supporting all three generations of Ethernet line cards, optical services modules, FlexWAN, and services modules for investment protection. - Delivering up to 40-Gbps full-duplex capacity per slot. - Delivering 200-Mpps hardware-based IPv6 using DFCs. - Providing for 256,000 NetFlow entries. Extensive feature support such as QoS mechanisms, hardware-based generic-routing-encapsulation (GRE) tunneling, and access control lists (ACLs) enable customers to build high-performance, feature-rich networks capable of offering services such as MPLS VPNs, metropolitan (metro) aggregation, and various WAN edge services.
The Cisco® Catalyst® 6500 Series/Cisco 7600 Series Supervisor Engine 720-3BXL (Sup 720-3BXL) is the third-generation supervisor engine for the Cisco Catalyst 6500 Series Switch and Cisco 7600 Series Router. It addresses the growing data-plane requirements of service provider and enterprise customers by delivering scalable, enhanced services such as hardware-accelerated IPv4, IPv6, and Multiprotocol Label Switching (MPLS). The Cisco Sup 720-3BXL integrates a high-capacity crossbar switching fabric that can deliver up to 40-Gbps capacity per slot for a total system capacity of 720 Gbps. The Cisco Sup 720-3BXL integrates a high-performance 720-Gbps switch fabric with a new routing and forwarding engine into a single module. The integrated switch fabric provides up to 40-Gbps full-duplex capacity per slot, allowing it to support third-generation high-performance, high-density Gigabit Ethernet and 10-Gigabit Ethernet interfaces as well as all existing LAN, WAN, and services modules, including the widely deployed FlexWAN and optical services modules to address a broad range of WAN edge aggregation deployments from DS-0 through OC-48/STM-16. The Cisco Sup 720-3BXL builds on the proven Cisco Express Forwarding architecture by supporting centralized forwarding (Cisco Express Forwarding) and distributed forwarding (distributed Cisco Express Forwarding) to provide a highly scalable and cost-effective platform. The Cisco Sup 720-3BXL delivers a modular, resilient, scalable, and secure Layer 2 or Layer 3 solution by: - Enabling advanced IP services such as MPLS, IPv6, and quality of service (QoS). - Supporting high-performance, third-generation Ethernet interfaces. - Delivering predictable and scalable system performance up to a sustained 400 Mpps using distributed forwarding cards (DFCs). - Scaling hardware-capable Forwarding Information Base (FIB) table entries to 1 million routes. - Supporting all three generations of Ethernet line cards, optical services modules, FlexWAN, and services modules for investment protection. - Delivering up to 40-Gbps full-duplex capacity per slot. - Delivering 200-Mpps hardware-based IPv6 using DFCs. - Providing for 256,000 NetFlow entries. Extensive feature support such as QoS mechanisms, hardware-based generic-routing-encapsulation (GRE) tunneling, and access control lists (ACLs) enable customers to build high-performance, feature-rich networks capable of offering services such as MPLS VPNs, metropolitan (metro) aggregation, and various WAN edge services.
Products specifications
Attribute nameAttribute value
CertificationFCC Part 15 (CFR 47) Class A, ICES-003 Class A, EN 55022 Class A, CISPR 22 Class A, AS/NZS 3548 Class A, VCCI Class A, EN55024, ETS300 386, EN50082-1, EN61000-6-1
SafetyUL 60950, EN 60950, CSA-C22.2 No. 60950, IEC 60950, AS/NZS 3260, IEC 60825-1,-2, EN 60825 -1,-2, 21CFR1040-10, TS001
Heat dissipation1345 BTU/h
Switching capacity40 Gbit/s