Black Box LIG1014A network switch Managed Gigabit Ethernet (10/100/1000)

Black Box LIG1014A. Switch type: Managed. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 10, Console port: RS-232. Full duplex. MAC address table: 8000 entries. Networking standards: IEEE 802.1D, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3x. Wall mountable
Manufacturer: Black Box
SKU: 4702353
Manufacturer part number: LIG1014A
GTIN: 0822088079569
- Economical switch delivers features normally found in more expensive switches.
- SFP ports enable single-mode or multimode Gigabit fiber uplinks over long distances.
- 10-/100-/1000-Mbps ports are autosensing for speed and duplex.
- Rated for extreme temperatures of -40 to +75° C.
- Dual DC power inputs for redundancy.
- IP30-rated housing is also rated for shock and vibration protection.
- Manage through a Web interface, SNMP, or command-line interface (CLI). Check
- Features bandwidth rate control, traffic prioritization, and quality of service.
- DIN rail or wall mount.

Multiple ports for flexibility.
This switch has ten 10/10/1000-Mbps RJ-45 copper ports and four RJ-45/SFP copper/fiber Gigabit combo ports for uplinks. It offers full wire-speed forwarding rates, autonegotiates for network speeds, and Auto-MDI/MDI-X, eliminating the need for crossover cables.

Maximize uptime.
Advanced management features help minimize network downtime by enabling you to remotely diagnose and manage network problems. And you'll eliminate the need to send IT technicians on site—thus lowering costs.

The switch is fully manageable through SNMP, a Web browser, Telnet, or a console port. Control the bandwidth on each port individually and set up Quality of Service (QoS) priority queuing for critical applications.

The switch supports port-based VLAN and IEEE 802.1Q VLAN tagging, MAC-based trunking, IP-multicast IGMP snooping, rapid spanning tree for redundancy. Plus, it has 802.1x port-based authentication for security.

Fast failovers.
The switch gives you maximum network flexibility: Spanning Tree Protocol (STP/RSTP), Link Aggregation Control Protocol, and a ring protocol. It offers a 20 millisecond or less failover.

Extreme applications.
- Encased in an IP30-rated metal case, this switch withstands extreme temperatures from -40°C to +75°C (-40° F to +167° F). Use it for:
- Security and surveillance, particularly to backhaul IP security camera data.
- Military applications, especially in ships and other vehicles.
- Factory automation for controlling machinery, PLCs, motor drives, sensors, counters, inspection cameras, and packaging equipment.
- Oil and gas fields or remote equipment monitoring and control.
- Building automation for controlling HVAC and lighting systems.

Installation options.
The switch features redundant power inputs and includes a DIN-rail mount. The panel and rack mounting kits and power supplies (MDR-40-12, MDR-40-24, MDR-40-48, and SDR-240-48) are sold separately. The switch also includes a serial cable (RJ-45/DB9) for the console connection.

 

  • Provides ten 10-/100-/1000M copper ports plus four multirate SFP-slots.
  • Fully managed via SNMP, Telnet, HTTPS, and CLI.
  • L2 wire speed switching.
  • 9K jumbo frames.
  • 8K MAC forwarding addresses.
  • High redundancy with network redundant LACP and Spanning Tree (STP/RSTP/MSTP).
  • Reliable with a link loss recovery < 20 ms.
  • State-of-the-art VLAN capabilities and VLAN mirroring.
  • Support 802.1p and TOS/DS Quality of Service with four queues per port.
  • Efficient bandwidth utilization with IGMP v1/v2 to multicast video over the network.
- Economical switch delivers features normally found in more expensive switches.
- SFP ports enable single-mode or multimode Gigabit fiber uplinks over long distances.
- 10-/100-/1000-Mbps ports are autosensing for speed and duplex.
- Rated for extreme temperatures of -40 to +75° C.
- Dual DC power inputs for redundancy.
- IP30-rated housing is also rated for shock and vibration protection.
- Manage through a Web interface, SNMP, or command-line interface (CLI). Check
- Features bandwidth rate control, traffic prioritization, and quality of service.
- DIN rail or wall mount.

Multiple ports for flexibility.
This switch has ten 10/10/1000-Mbps RJ-45 copper ports and four RJ-45/SFP copper/fiber Gigabit combo ports for uplinks. It offers full wire-speed forwarding rates, autonegotiates for network speeds, and Auto-MDI/MDI-X, eliminating the need for crossover cables.

Maximize uptime.
Advanced management features help minimize network downtime by enabling you to remotely diagnose and manage network problems. And you'll eliminate the need to send IT technicians on site—thus lowering costs.

The switch is fully manageable through SNMP, a Web browser, Telnet, or a console port. Control the bandwidth on each port individually and set up Quality of Service (QoS) priority queuing for critical applications.

The switch supports port-based VLAN and IEEE 802.1Q VLAN tagging, MAC-based trunking, IP-multicast IGMP snooping, rapid spanning tree for redundancy. Plus, it has 802.1x port-based authentication for security.

Fast failovers.
The switch gives you maximum network flexibility: Spanning Tree Protocol (STP/RSTP), Link Aggregation Control Protocol, and a ring protocol. It offers a 20 millisecond or less failover.

Extreme applications.
- Encased in an IP30-rated metal case, this switch withstands extreme temperatures from -40°C to +75°C (-40° F to +167° F). Use it for:
- Security and surveillance, particularly to backhaul IP security camera data.
- Military applications, especially in ships and other vehicles.
- Factory automation for controlling machinery, PLCs, motor drives, sensors, counters, inspection cameras, and packaging equipment.
- Oil and gas fields or remote equipment monitoring and control.
- Building automation for controlling HVAC and lighting systems.

Installation options.
The switch features redundant power inputs and includes a DIN-rail mount. The panel and rack mounting kits and power supplies (MDR-40-12, MDR-40-24, MDR-40-48, and SDR-240-48) are sold separately. The switch also includes a serial cable (RJ-45/DB9) for the console connection.

 

  • Provides ten 10-/100-/1000M copper ports plus four multirate SFP-slots.
  • Fully managed via SNMP, Telnet, HTTPS, and CLI.
  • L2 wire speed switching.
  • 9K jumbo frames.
  • 8K MAC forwarding addresses.
  • High redundancy with network redundant LACP and Spanning Tree (STP/RSTP/MSTP).
  • Reliable with a link loss recovery < 20 ms.
  • State-of-the-art VLAN capabilities and VLAN mirroring.
  • Support 802.1p and TOS/DS Quality of Service with four queues per port.
  • Efficient bandwidth utilization with IGMP v1/v2 to multicast video over the network.
Products specifications
Attribute name Attribute value
Width 2.36"
Depth 4.29"
Height 6.06"
Weight 2.43 lbs
Switch Type Managed
SFP module slots quantity 4
Number of queues 8
Authentication MAC-based authentication
Number of multicast groups filtered 255
Installed SFP modules quantity 0
Installed SFP+ modules quantity 0
Harmonized System (HS) code 85176990
DHCP features DHCP server, DHCP client
Link aggregation Yes
IGMP snooping Yes
Technical details
Product color Black
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity 10
Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)
Design
Certification UL508/CSA C22, EN61010-1, CE, FCC 15, CISPR22 (EN55022) A, IEC60068-2-6, -27, -32, IEC61000-4-2, -3, -4, -5, -6, RoHS, WEEE
DIN rail mounting Yes
Operational conditions
Operating temperature (T-T) -40 - 75 °C
Storage temperature (T-T) -40 - 85 °C
Operating relative humidity (H-H) 5 - 95 %
Power
Input voltage 12 - 58 V
Power consumption (max) 11 W
Features
LED indicators LAN, Power
International Protection (IP) code IP30
Full duplex Yes
Wall mountable Yes
Other features
MAC address table 8000 entries
Performance
Console port RS-232
Fiber optic connector SFP
Networking standards IEEE 802.1D, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3x
Auto MDI/MDI-X Yes
Network
Jumbo frames 9000
Multicast support Yes
Jumbo frames support Yes
Auto-negotiation Yes
10G support No
Quality of Service (QoS) support Yes
VLAN support Yes
Spanning tree protocol Yes
Data transmission
Packet buffer memory 0.5 MB
Store-and-forward Yes
Power over Ethernet (PoE)
Power over Ethernet (PoE) No
Management features
Web-based management Yes
Security
Security algorithms 802.1x RADIUS, HTTPS, SNMP, SSH
System event log Yes
Product tags
  • (80075)